When choosing ceramic tiles, good-looking is the basis, and the key is to always look good! Recently, in the ceramic tile industry, a high-gloss marble tile called Bighorn Deer, which is known as the "King of Wear-Resistant", has appeared in the market. I heard that ordinary ceramic tiles are no match for it (shh, to be honest, I don't believe it), so I called on my colleagues to initiate A test that can be called "modern torture" was conducted in order to "make it fancy" and use it as a prop!
1. Wear resistance test of fancy props. Is he really not afraid of being slapped in the face?
Anyone who knows the art knows that if ceramic tiles want to have a good decorative effect, they must not only look good, but they must also be resistant to damage. In daily life, ceramic tiles will be more or less worn, so wear resistance is an important indicator for testing the performance of ceramic tiles.
1. Three preliminary tests:
So how to judge whether the ceramic tile surface is wear-resistant? Let us reviewers give it a try.
PC Jiang sent Brother Meng, a member of the team who has been working out all year round and has incredible physical fitness, to participate in the first round of steel brush friction experiments. Brother Meng pressed the steel brush with both hands to make it fit tightly with the tile surface, and then used all his strength to scrape the surface of the big-horned deer tiles.
After the steel brush continued to rub at high speed for about 45 seconds, the tile surface became a little hot, so Meng was "merciful". However, according to PC Jiang's careful observation, the super wear-resistant deer's "fur was not damaged" and the surface of the tile was completely intact. Traces of damage.
The steel brush test passed easily, but under the smaller contact area and sharper blade test, can the ceramic tiles pass the test without any damage?
We put 10 pieces of A4 paper on the tiles and use a sharp knife to cut through the paper to the surface of the tiles.
After cutting several times, carefully observe the position of the knife tip. There is still no knife mark left. The knife edge test passed perfectly!
In order to let everyone get a better understanding of the daily use of Big Horn Deer ceramic tiles, PC Jiang also specially prepared 10cm ultra-high high heels to demonstrate to everyone. However, before the high heels were put on, Big Horn Deer staff stopped them. The reason turned out to be: too high. It's child's play, our tiles are not afraid of wear and tear when wearing skate shoes.
You can see an adult man weighing about 70kg wearing skate shoes and dragging the skate shoes on the tiles without slipping under his feet. It seems that the anti-slip performance of the tiles is also very good.
After walking back and forth a few times, PC Jiang observed that there were no signs of wear on the tiles in the area where sharp skate shoes were used. It can be seen that this large-horned deer ceramic tile is enough to withstand the test of various wear-resistant scenes in life, and can maintain the gloss of the ceramic tile surface for a long time.
2. Three advanced tests:
The preliminary test was too childish for Bighorn Ceramic Tiles. PC Jiang, who had anticipated this situation for a long time, had no choice but to take out the upgraded version of his "killer weapon" - a two-piece screwdriver & scissors set. Don't underestimate these two common objects in life. You must know that with certain wrist strength and skills, they can even create intimate "sparks" with ceramic tiles.
The Big Horn Deer Ceramic Tile has a tough surface. Use a cross-shaped screwdriver to quickly and forcefully scratch the surface of the Big Horn Deer Ceramic Tile. When the metal collides with the board, there will be a harsh scratching sound and sparks will fly everywhere.
However, under such a fierce collision, no scratches were left on the surface of the ceramic tiles.
After that, we chose a pair of sharp scissors as a test tool. We used the sharpest part of the top of the scissors to scratch back and forth on the big horned deer tiles, and there were still sparks.
Looking at the enlarged view, there are still no scratches on the surface of the ceramic tiles. PC Jiang deliberately touched it with the palm of his hand and did not feel any scratch marks.
The high-speed impact of sharp metal did not cause damage to the big horned deer tiles, but what about the high temperature?
In order to better demonstrate the test results, we turned off the lights in the test environment, then sprinkled alcohol on the tiles and ignited it. Instantly, the surface of the tiles burned with fire. The entire burning process lasted about 15 seconds.
After turning on the light, observe that there are only a few residual alcohol stains on the surface of the ceramic tiles, and there are no traces of high temperature left after burning. Looks bigHorned deer tiles are also resistant to high temperatures.
3. Three advanced tests:
After several "difficulties", the big-horned deer tiles were perfectly resolved, and PC Jiang had to upgrade the difficulty of the evaluation again.
Bone Cleaver Chopping
Considering that some friends may use ceramic tiles in the kitchen area, the ability of the ceramic tiles to resist stains and oil stains is definitely inevitable, and the hardness of the ceramic tiles may even need to be upgraded to "beware" of sharp props that accidentally fall.
We prepared large pig bones and a machete, and after several violent chops on the surface of the tiles, the bones were scattered to the side, and the clang sound of the blade touching the brick surface could be heard.
Afterwards, we observed the wear and tear in the test area. There were no knife marks left, and the oily stains on the pork completely disappeared after a simple wipe. The brick surface was as smooth as ever, wear-resistant and stain-resistant. The big horned deer tiles are really good.
1-5 Mohs hardness pen test
A layman looks at the excitement, an expert looks at the door. Ceramic tile connoisseurs all know that there is one number to look for when purchasing ceramic tiles: Mohs hardness. The higher the Mohs hardness, the more scratch-resistant the ceramic tile is.
Big Horn Deer’s super wear-resistant marble tiles create the original “super wear-resistant diamond glaze” national patent technology. The super wear-resistant diamond glaze uses the world’s number one glaze company, Italy’s Carobia glaze, with a wear resistance of 4 Grade or above, the wear resistance is 3 times higher than that of ordinary ceramic tiles. We use Mohs hardness pens for testing on site, and use grade 1-5 hardness pens to gradually upgrade for testing.
As a result, the performance of the Big Horn Deer ceramic tiles exceeded expectations. There were no scratches even after being scratched by stone with a hardness of 5. It seems that the craftsmanship of the wear resistance is indeed very good, and the glaze can withstand the test of time.
500 mesh angle grinder grinding
Dajiulu ceramic tiles use super wear-resistant diamond glaze technology, and the wear resistance can reach more than 6,000 revolutions. Compared with the general industry level of 750-1,500 revolutions, it can be said to be a qualitative improvement.
We use a 500-grit emery professional wear-resistant machine to polish the surface of the ceramic tiles. As the machine rotates at high speed, PC Jiang can feel the wind caused by the machine's operation on site, and can also smell the high-intensity friction of the machine against the tiles. The special odor produced.
According to DajiaoLu ceramic tile professionals said that this kind of polishing intensity is based on daily life experience. The polished ceramic tiles are equivalent to the ceramic tiles after ten years of use.
The polished tiles left black marks on the surface. PC Jiang thought that the big-horned deer tiles would finally be unable to withstand the professional angle grinder. Unexpectedly, there were no marks left on the tiles after maintenance. The black marks were just left by the high temperature. The traces that came down did not harm the glaze of the tile itself.
It can be seen that the wear resistance of this large-horned deer ceramic tile is enough to cope with the friction in daily life and the collision of professional sharp tools, and it is more suitable for long-term use in the home.
2. Continue to do things. In addition to being wear-resistant, what else can it do
1. Anti-skid speed test
The beauty of your home is important, but safety is more important! If you have elderly and children at home, you must first choose ceramic tiles with good anti-slip properties when buying ceramic tiles, especially in balconies, bathrooms, kitchens and other application spaces where there are water and oil stains!
In the anti-slip test, the evaluators adjusted the slope of the tile surface to about 20° and placed vases on it. On the smooth ceramic tiles, the vase showed no signs of slipping; then, the on-site evaluators sprinkled water on the surface of the ceramic tiles to simulate the situation of water on the ground at home, but the vase on the surface of the ceramic tiles never moved.
It can be seen that the anti-slip performance of the big-horned deer tiles is very good. As long as the water stains are cleaned in time during daily use, there is no need to worry about the occurrence of slipping.
2. Close seam joint paving technology
With the same tiles, why do other people's homes look high-end and classy, but my own home looks cheap?
You must know that decoration is not only expensive and laborious, but also comprehensively tests the aesthetic taste of the decorator. Take ceramic tiles as an example. The gaps between the tiles must be small enough to look good and be durable. Whether the gap is tight mainly depends on two points: first, whether the tile itself is flat; second, whether the tiling process is mature.
We used A4 paper to test the gaps in the ceramic tiles on site. We inserted a piece of ordinary A4 paper with a thickness of about 0.088mm into the ceramic tiles to leave the gaps. We moved our hands back and forth to insert the paper smoothly.
Compared with the 1-1.5mm seams of ordinary paving craft tiles, the seams of Bighorn Deer dense seam marble tiles are as fine as 0.3mm. The overall vision is naturally more beautiful and refined, and people can easily feel the delicate tile texture. Effect.
Editor’s summary:
Whether the ceramic tiles meet the self-assessmentBeauty can be observed with the eyes alone, but the real wear-resistance and other sustained properties of ceramic tiles often take time to verify. After rounds of violent evaluations, Big Horn Deer super wear-resistant marble tiles have performed well in tests such as wear resistance, anti-slip and aesthetics, and have strong stability. A good wear-resistant ceramic tile will last forever. I tried this super wear-resistant marble ceramic tile. Are you excited?
